Harvard Pump 11 Elite infuse-only dual syringe pump (704501)

 240,000.00 incl. GST

The Pump 11 Elite Series of syringe pumps expands its capabilities to satisfy your experimental requirements. These compact syringe pumps carry on the tradition as the premiere workhorse infusion pump, offering unparalleled ease of use with a high resolution touch screen with intuitive icon interface.

These innovative syringe pumps have a new mechanism that includes a tight gripping, more secure syringe clamp for syringes ranging from 0.5ul to 60ml (single syringe) and 0.5ul to 10 ml (dual syringe). The Pump 11 Elite Series offers enhanced flow performance with high accuracy and smooth flow from 1.28 pl/min to 88.28 ml/min.

The Pump 11 Elite Infusion Only Models are available in single or dual syringe rack configurations. These pumps have advanced connectivity with a USB serial port for computer control and footswitch connection for stop/start control (footswitch sold separately).

SKU: HA1100D Categories: ,


Since 1901 Harvard Apparatus has been supporting bioresearch fluidics requirements with the culmination being the introduction of the first commercial syringe pump for bioresearch in 1956. Since 1956, over 70,000 satisfied syringe pump users around the world have made Harvard Apparatus syringe pumps the worlds #1 choice.

The Pump 11 Elite Series is a family of accurate, low flow syringe pumps designed for use in applications including: mass spec calibration, drug and nutritional studies, reactor dosing, and electro-spinning.

Easy-to-Use Interface The Pump 11 Elite color LCD touch screen with graphic user interface is divided into three basic areas: Operations Display, Message Area, and Navigation. This configuration allows you to easily move through all menu selections and data entry by gently touching the onscreen buttons with a finger or the tip of a soft, non-sharp object such as a pencil eraser.

The Quick Start infusion screen is the primary “home” for the pumps. From that screen you can access all the commands needed to operate the Pump 11 Elite, as well as access the main system settings.

The Message Area of the touch screen is used to display helpful instructions for the currently displayed screen. It is also used to display error or warning messages to indicate problem conditions in a Method or error conditions during pump operation.

You can control operations directly with the touch screen or remotely from an independent computer or device via the external footswitch interface.

The infusion Only (single and dual syringe models) support infusion operations at user-defined flow rates and with selectable target volume or time values to control the total infusion volume. The Infusion Only models do not include programmable, user-defined methods. (Infusion/Withdrawal Programmable models are also available)

Accessories A full range of accessories are compatible with the Pump 11 Elite including syringe heaters, connectors, tubing, syringes and more.






Accuracy ±0.5% ±0.5%
Reproducibility ±0.05% ±0.05%
Classification Class I Class I
Dimensions Control Box LxDxH in cm 9.0 x 7.0 x 6.0 (22.6 x 17.78 x 15.0) 9.0 x 7.0 x 6.0 (22.6 x 17.78 x 15.0)
Display 4.3″ WQVGA TFT Color Display with Touchpad 4.3″ WQVGA TFT Color Display with Touchpad
Drive Motor 0.9° Stepper Motor 0.9° Stepper Motor
Environmental Humidity 20% to 80% RH, non condensing 20% to 80% RH, non condensing
Environmental Operating Temperature English 40°F to 104°F 40°F to 104°F
Environmental Operating Temperature Metric 4°C to 40°C 4°C to 40°C
Environmental Storage Temperatue English 14°F to 158°F 14°F to 158°F
Environmental Storage Temperatue Metric -10°C to 70°C -10°C to 70°C
Flow Rate Maximum 88.28 ml/min using 60 ml syringe 31.97 ml/min using 10 ml syringe
Flow Rate Minimum 1.28 pl/min using 0.5 µl syringe 1.28 pl/min using 0.5 µl syringe
I O TTL Connectors 15 pin D-Sub Connector 15 pin D-Sub Connector
Input Power 12-30 VDC 12-30 VDC
Installation Category II II
Max Linear Force 35 lbs @ 100% Force Selection 35 lbs @ 100% Force Selection
Mode of Operation Continuous Continuous
Motor Drive Control Microprocessor with 1/16 microstepping Microprocessor with 1/16 microstepping
Net Weight English 4.6 lb 4.6 lb
Net Weight Metric 2.1 kg 2.1 kg
No of Syringes 1 2
Non Volatile Memory Storage of all settings Storage of all settings
Number of Microsteps per one rev of Lead Screw 15,360 15,360
Pollution Degree 1 1
Pump Configuration Standard Standard
Pump Function Infusion Only Infusion Only
Pusher Travel Rate Maximum 159.8 mm/min 159.8 mm/min
Pusher Travel Rate Minimum 0.18 µm/min 0.18 µm/min
RS 232 Connectors optional RJ-11 optional RJ-11
Regulatory Certifications CE, UL, CSA, CB Scheme, EU RoHS CE, UL, CSA, CB Scheme, EU RoHS
Step Rate Maximum 26 µsec/µstep 26 µsec/µstep
Step Rate Minimum 27.5 sec/µstep 27.5 sec/µstep
Syringe Size Maximum 60 ml 10 ml
Syringe Size Minimum 0.5 µl 0.5 µl
USB Connectors Type B Type B
Voltage Range 100-240 VAC, 50/60 Hz 100-240 VAC, 50/60 Hz


Go to Top